Author Photo

Ahmer's SysAdmin Recipes is a blog for Linux System Administrators. This blog provides recipes for Installation & Configuration of Linux, Ubuntu, Oracle Database, MySQL, Apache, Nginx, Oracle Cloud Control, FreeIPA, Kerberos & OpenLDAP, Subversion, PXE, DevOps, etc. over Red Hat Enterprise Linux (RHEL), CentOS, Ubuntu and Windows.

Please give me your feedback and help me improve this blog. Please let me know If you want me to write on a specific topic.

Sunday, 28 October 2018

Kickstart: Automate PXE Client Installations

Kickstart Automate PXE Client InstallationsKickstart is an installation method, used by Red Hat to automatically perform unattended Operating System installation and configuration. With Kickstart, a system administrator can create a single file containing the answers to all the questions that would normally be asked during a typical installation.

In our previous post “Setup a PXE Boot Server in RHEL/CentOS 7”, we have configured a PXE boot server for network installations of new systems. However, the installation method is manual. Now, in this article, we will combine the Kickstart with PXE boot Server to setup fully automated, unattended and consistent installations for our PXE clients.

To task can be broken down into following two simple steps.

1) Create a kickstart file
2) Configure PXE boot server to use Kickstart file

Note: In this article, we are performing everything from CLI, therefore, it is highly recommended that, you should have Linux Pocket Guide: Essential Commands for quick reference.

 

System Specification:

We use the same Linux server that we have configured as PXE Boot Server in our previous article. The specifications have been re-mentioned below for convenience of the readers.

CPU: 2 Core (2.4 Mhz)
Memory: 2 GB
Storage: 50 GB
Operating System: RHEL 7.5
Hostname: pxe-server.itlab.com
IP Address: 192.168.116.41/24

 

Create a Kickstart file:

Kickstart file is a text file and can be created using any available text editor. Furthermore, we also have a very handy GUI tool in Linux called Kickstart Configurator. With Kickstart Configurator, we can simply select the options and the Kickstart file will automatically generated by the software.

Kickstart configurator is provided in system-config-kickstart.noarch package. And can be run using command system-config-kickstart (you need an X-Server to display the software interface). Some screenshots of the Kickstart Configurator are as follows:

kickstart-configurator-01kickstart-configurator-02kickstart-configurator-03

Kickstart Configurator is quiet handy tool and anyone can create a complicated Kickstart file in just a few clicks.

Alternatively, we can use a system generated Kickstart template, which is created by the Anaconda installer during operating system installation in the home directory of root user (i.e. /root/anaconda-ks.cfg). This file contains the actual user inputs/selections that has been made during the installation of Operating System on that machine. Therefore, we can use this Kickstart template after adjusting the contents according to our requirements.

Copy the anaconda-ks.cfg to our FTP public directory.

[root@pxe-server ~]# cp anaconda-ks.cfg /var/ftp/pub/rhel7/rhel7.cfg [root@pxe-server ~]# chmod +r /var/ftp/pub/rhel7/rhel7.cfg

Now edit the rhel7.cfg file.

[root@pxe-server ~]# vi /var/ftp/pub/rhel7/rhel7.cfg

The final contents of the rhel7.cfg are:

#platform=x86, AMD64, or Intel EM64T #version=DEVEL # Install OS instead of upgrade install # Keyboard layouts keyboard 'us' # Root password rootpw --iscrypted $1$vyNMLtgd$VmtByshddZSBK..uuFhoH0 # Use network installation url --url="ftp://192.168.116.41/pub/rhel7" # System language lang en_US # System authorization information auth --useshadow --passalgo=sha512 # Use graphical install graphical firstboot --disable # SELinux configuration selinux --enforcing # Firewall configuration firewall --enabled --ssh # Network information network --bootproto=dhcp --device=eth0 # Reboot after installation reboot # System timezone timezone Asia/Karachi # System bootloader configuration bootloader --location=mbr --boot-drive=sda autopart --type=lvm # Partition clearing information clearpart --none --initlabel %addon com_redhat_kdump --disable --reserve-mb='auto' %end # Packages to be installed %packages @core %end

We have successfully created a Kickstart file for automated installations. To make it usable by our PXE boot server, we have to include it in the menu command of tftp.

 

Configure PXE boot server to use Kickstart file:

Edit the PXE boot menu for BIOS based clients.

[root@pxe-server ~]# vi /var/lib/tftpboot/pxelinux.cfg/default

and append the kickstart directive therein. Contents of this file after editing are:

default menu.c32 prompt 0 timeout 30 menu title Ahmer's PXE Menu label Install RHEL 7.5 kernel /networkboot/rhel7/vmlinuz append initrd=/networkboot/rhel7/initrd.img inst.repo=ftp://192.168.116.41/pub/rhel7 ks=ftp://192.168.116.41/pub/rhel7/rhel7.cfg

Similarly, edit the PXE boot menu for UEFI based clients.

[root@pxe-server ~]# vi /var/lib/tftpboot/grub.cfg

and append the kickstart directive therein. Contents of this file after editing are:

set timeout=60 menuentry 'Install RHEL 7.5' { linuxefi /networkboot/rhel7/vmlinuz inst.repo=ftp://192.168.116.41/pub/rhel7/ inst.ks=ftp://192.168.116.41/pub/rhel7/rhel7.cfg initrdefi /networkboot/rhel7/initrd.img }

Test the configurations with BIOS and UEFI based machines. Now, the whole installation is automated, and operating system will be installed and configured as per our Kickstart file.

Kickstart: Automate PXE Client Installations


YOU MIGHT ALSO LIKE:

8 comments:

  1. Everything here works like a charm. I got my first pxe boot server working with automated installation in 1 client. Thank you so much for this!

    ReplyDelete
  2. Daaang!!! Great article. Steps are very clear with description to follow!! �� i appreciated it all your effort! I learn some good stuff from your Blog! I have only one concern regarding search engine. You should include a search engine in your blog to easily navigate/search to the website. But beside that everything is awsome.

    ReplyDelete
    Replies
    1. Hi,
      Thanks you for the appreciation.
      A search box is already embedded in the page. But as per you advice, I will move it a better place for more accessibility.

      Delete
  3. Bhai you are awesome as i mentioned earlier in my post...your tutorial are very well written. person like me who have no prior Linux experience can follow and achieve. i learned too many things from your blog... i would like to say thankyou for your dedication and effort. I just faced one issue what so far is root passwd in ks.cfg file. which i reset it through emergency mode. what i did is i copied my root passwd from shadow file exactly and copied into ks.cfg file. after installation i won't able to login with the same passwd. can you please suggest? what could be wrong? i make sure i copy/paste correct root passwd from my shadow file or is there anyway that i want root set there passwd on login? i will really appreciate.

    thankyou again...

    ReplyDelete
    Replies
    1. Thanks for appreciation.

      May be there is some issue of character sets or encryption scheme.
      Try to use a plain text password as follows.

      rootpw 123

      Delete
  4. Sorry Forget to mention about Search box. now you set it up on the right place easy to access and view. thankyou for that too..

    ReplyDelete